CPM offers quality used injection molding equipment, auxiliary lines of dryers, loaders, temperature controlers along with custom manufactured Screws and Barrels. Central Plastic Machinery
   
HOME | TOYO | MATSUI | SCREWS & BARRELS | USED MACHINERY | E-MAIL | LINKS
22
TM-400H Specifications
Standard Features | Optional Features
Ti-35H
Ti-55H
Ti-90H
TM-110H
TM-150H
TM-200H
TM-245H
TM-300H
TM-400H
TM-500H
 
Download PDF File
Download
[PDF File]
 
 
Need a Brochure?
View Brochure Directory
View Brochure Directory
 
    Email this Page Print this Page
Injection Unit
System 1 In-line screw
Injection stroke in 12.05
Screw diameter in 2.68 2.95 3.27
Nominal injection capacity in 67.8 82.4 101.0
Injection capacity (ps) oz 37.2 45.3 55.5
Injection rate High pressure in/sec 23.4 28.4 34.8
High velocity in/sec 23.4 28.4 34.8
Injection pressure High pressure psi 25,397 20,875 17,050
High velocity psi 25,397 20,875 17,050
Recovery rate (ps) oz/sec 2.4 2.8 2.9
Screw revolution rpm 10~203
10~260
Nozzle pressure force U.S.ton 8.7
Hopper capacity gal 33.0
Screw drive system 2   Hydraulic motor
Clamping Unit
Clamping system 1   Double toggle
Clamping force U.S.ton 400
Clamping stroke in 27.55
Min. mold height in 11.81
Max. mold height in 29.52
Tie bar clearance in   31.89 X 31.89
Die plate size in 41.34 X 41.34
Ejector force U.S.ton 10.6
Ejector stroke in 6.30
Mechanical stopper adjustable range in 1
Others
Heater capacity kw 25.6
Pump motor kw/hp 45.0(60)
Mold height adjustor motor kw/hp 0.75(1)
Oil tank capacity gal 132.0
Machine dim. ( L x W x H ) in 275.6 X 72.8 X 95.3
Machine weight U.S.ton 17.6
Notes:
  1. *mark figure varies depending on molding conditions.
  2. Figures in are optional.
  3. The applicable max. injection pressure and holding pressure will be restricted according to the material in the real molding operation.
  4. The figures for the max injection rate and the max. injection speed are calculated ones. The actual injection rate and injection speed will be restricted by pressure. Actual setting pressure may be restricted by molding conditions and cycle time.
  5. The figures are subject to change without any legal obligation on the part of the manufacture.
  6. A large-sized screw may not be applicable to some kinds of material.
    TOP