CPM offers quality used injection molding equipment, auxiliary lines of dryers, loaders, temperature controlers along with custom manufactured Screws and Barrels. Central Plastic Machinery
   
HOME | TOYO | MATSUI | SCREWS & BARRELS | USED MACHINERY | E-MAIL | LINKS
22
TM-245H Specifications
Standard Features | Optional Features
Ti-35H
Ti-55H
Ti-90H
TM-110H
TM-150H
TM-200H
TM-245H
TM-300H
TM-400H
TM-500H
 
Download PDF File
Download
[PDF File]
 
 
Need a Brochure?
View Brochure Directory
View Brochure Directory
 
    Email this Page Print this Page
Injection Unit
System 1 In-line screw
Injection stroke in 8.66
Screw diameter in 2.17 2.36 2.68
Nominal injection capacity in 31.9 38.0 48.7
Injection capacity (ps) oz 17.5 20.8 26.7
Injection rate High pressure in/sec 15.7 18.7 24.1
High velocity in/sec 15.7 18.7 24.1
Injection pressure High pressure psi 25,724 21,614 16,833
High velocity psi 25,724 21,614 16,833
Recovery rate (ps) oz/sec 1.9 2.0 2.3
Screw revolution rpm 10~183
10~261
Nozzle pressure force U.S.ton 6.3
Hopper capacity gal 14.5
Screw drive system 2   Hydraulic motor
Clamping Unit
Clamping system 1   Double toggle
Clamping force U.S.ton 242
Clamping stroke in 20.47
Min. mold height in 9.84
Max. mold height in 25.59
Tie bar clearance in   24.02 X 24.02
Die plate size in 32.28 X 32.28
Ejector force U.S.ton 7.2
Ejector stroke in 5.12
Mechanical stopper adjustable range in 16.12~20.471
Others
Heater capacity kw 15.8
Pump motor kw/hp 30.0(40)
Mold height adjustor motor kw/hp 0.4(1/2)
Oil tank capacity gal 79.3
Machine dim. ( L x W x H ) in 233.6 X 54.6 X 82.1
Machine weight U.S.ton 10.5
Notes:
  1. *mark figure varies depending on molding conditions.
  2. Figures in are optional.
  3. The applicable max. injection pressure and holding pressure will be restricted according to the material in the real molding operation.
  4. The figures for the max injection rate and the max. injection speed are calculated ones. The actual injection rate and injection speed will be restricted by pressure. Actual setting pressure may be restricted by molding conditions and cycle time.
  5. The figures are subject to change without any legal obligation on the part of the manufacture.
  6. A large-sized screw may not be applicable to some kinds of material.
    TOP