CPM offers quality used injection molding equipment, auxiliary lines of dryers, loaders, temperature controlers along with custom manufactured Screws and Barrels. Central Plastic Machinery
   
HOME | TOYO | MATSUI | SCREWS & BARRELS | USED MACHINERY | E-MAIL | LINKS
22
TM-150 H2 Specifications
Standard Features | Optional Features
Ti-35H
Ti-55H
Ti-90H
TM-110H
TM-150H
TM-200H
TM-245H
TM-300H
TM-400H
TM-500H
 
Download PDF File
Download
[PDF File]
 
 
Need a Brochure?
View Brochure Directory
View Brochure Directory
 
View TM-150H Photograph View Photo Email this Page Print this Page
Injection Unit
System 1 In-line screw
Injection stroke in 6.30
Screw diameter in 1.57 1.81
Nominal injection capacity in 12.2 16.2
Injection capacity (ps) oz 6.7 8.8
Injection rate High pressure in/sec 9.0 12.0
High velocity in/sec 9.0 12.0
Injection pressure High pressure psi 27,971 21,145
High velocity psi 27,971 21,145
Recovery rate (ps) oz/sec 0.8 1.1
Screw revolution rpm 10~280
Nozzle pressure force U.S.ton 6.3
Hopper capacity gal 14.5
Screw drive system 2   Hydraulic motor
Clamping Unit
Clamping system 1   Double toggle
Clamping force U.S.ton 150
Clamping stroke in 15.75
Min. mold height in 5.91
Max. mold height in 17.72
Tie bar clearance in   18.11 X 18.11
Die plate size in 25.20 X 25.20
Ejector force U.S.ton 4.5
Ejector stroke in 3.94
Mechanical stopper adjustable range in 111.42~15.75
Others
Heater capacity kw 7.2
Pump motor kw/hp 18.5(25)
Mold height adjustor motor kw/hp 0.2(1/4)
Oil tank capacity gal 47.6
Machine dim. ( L x W x H ) in 177.9 x 46.1 x 77.2
Machine weight U.S.ton 5.2
Notes:
  1. *mark figure varies depending on molding conditions.
  2. Figures in are optional.
  3. The applicable max. injection pressure and holding pressure will be restricted according to the material in the real molding operation.
  4. The figures for the max injection rate and the max. injection speed are calculated ones. The actual injection rate and injection speed will be restricted by pressure. Actual setting pressure may be restricted by molding conditions and cycle time.
  5. The figures are subject to change without any legal obligation on the part of the manufacture.
  6. A large-sized screw may not be applicable to some kinds of material.
    TOP