CPM offers quality used injection molding equipment, auxiliary lines of dryers, loaders, temperature controlers along with custom manufactured Screws and Barrels. Central Plastic Machinery
   
HOME | TOYO | MATSUI | SCREWS & BARRELS | USED MACHINERY | E-MAIL | LINKS
22
Si-750 II Specifications
Standard Features | Optional Features
Si-35 II
Si-55 II
Si-90 II
Si-110 II
Si-150 II
Si-200 II
Si-300 II
Si-400 II
Si-500 II
Si-750 II
 
Download PDF File
Download
[PDF File]
 
 
Need a Brochure?
View Brochure Directory
View Brochure Directory
 
  Email this Page Print this Page
Injection Unit
System  In-line screw
Injection Unit  H-750BU
Injection stroke in 19.59
Screw diameter in 3.54 3.94 4.33
Nominal injection capacity in 193.8 240.1 290
Injection capacity (PS) oz 106.6 131.5 159.2
Injection rate in/sec 58.0 72.0 86.9
Max. Injection speed in/sec 5.9 5.9 5.9
Max. Injection pressure psi 32,706 27,018 22,041
Max. Holding pressure psi 28,440 24,174 18,908
Screw revolution rpm ~160
Nozzle pressure force U.S.ton 4.41
Hopper capacity gal 33.0
Clamping Unit   
Clamping system Double toggle
Clamping force U.S.ton 750
Clamping stroke in 39.37
Min. mold height in 17.72
Max. mold height in 43.31
Tie-bar clearance ( H x V ) in 45.08 x 45.08
Die plate size ( H x V ) in 61.02 x 61.02
Ejector force U.S.ton 16.5
Ejector stroke in 7.87
Others
Heater capacity kw ----
Machine dim. ( L x W x H ) in 335x 75 x95
Machine weight lbs 100,000
Notes:
  1. *mark figure varies depending on molding conditions.
  2. Figures in are optional.
  3. The applicable max. injection pressure and holding pressure will be restricted according to the material in the real molding operation.
  4. The figures for the max injection rate and the max. injection speed are calculated ones. The actual injection rate and injection speed will be restricted by pressure. Actual setting pressure may be restricted by molding conditions and cycle time.
  5. The figures are subject to change without any legal obligation on the part of the manufacture.
  6. A large-sized screw may not be applicable to some kinds of material.
    TOP