CPM offers quality used injection molding equipment, auxiliary lines of dryers, loaders, temperature controlers along with custom manufactured Screws and Barrels. Central Plastic Machinery
   
HOME | TOYO | MATSUI | SCREWS & BARRELS | USED MACHINERY | E-MAIL | LINKS
22.
Si-110 II Specifications
Standard Features | Optional Features
Si-35 II
Si-55 II
Si-90 II
Si-110 II
Si-150 II
Si-200 II
Si-300 II
Si-400 II
Si-500 II
Si-750 II
 
Download PDF File
Download
[PDF File]
 
 
Need a Brochure?
View Brochure Directory
View Brochure Directory
 
  Email this Page Print this Page
Injection Unit
System  In-line screw
Injection Unit   H-150U H-200AU H-200BU
Injection stroke in 6.61 5.01 6.30
Screw diameter in 1.10 1.26 1.26 1.42 1.57 1.57 1.81
Nominal injection capacity in 6.28 8.24 7.37 9.36 11.44 12.20 14.21
Injection capacity (PS) oz 3.24 4.48 4.02 5.08 6.26 6.70 8.82
Injection rate in/sec 11.22 14.73 7.37 9.36 11.44 11.17 14.83
Max. Injection speed in/sec 11.81 11.81 7.87 7.87 7.87 5.75 5.75
Max. Injection pressure psi 31284 24174 31,284 27,729 22,752 31,284 24,174
Max. Holding pressure psi 25596 21330 28,440 24,885 19,908 27,018 21,330
Screw revolution rpm ~350 ~350 ~350
Nozzle pressure force U.S.ton 2.20 2.75 2.75
Hopper capacity gal 10.7 10.7 10.7
Clamping Unit   
Clamping system Double toggle
Clamping force U.S.ton 110
Clamping stroke in 14.17
Min. mold height in 5.91
Max. mold height in 20.08
Tie-bar clearance ( H x V ) in 16.14 X 16.14
Die plate size ( H x V ) in 22.83 X 23.83
Ejector force U.S.ton 2.8
Ejector stroke in +3.94
Others
Heater capacity kw 5.4 7.3 8.7
Machine dim. ( L x W x H ) in 165.9 X 43.1X 62.4
Machine weight lbs 8800
Notes:
  1. *mark figure varies depending on molding conditions.
  2. Figures in are optional.
  3. The applicable max. injection pressure and holding pressure will be restricted according to the material in the real molding operation.
  4. The figures for the max injection rate and the max. injection speed are calculated ones. The actual injection rate and injection speed will be restricted by pressure. Actual setting pressure may be restricted by molding conditions and cycle time.
  5. The figures are subject to change without any legal obligation on the part of the manufacture.
  6. A large-sized screw may not be applicable to some kinds of material.
    TOP